At railroad or train crossings: Flashing red warning lights indicate you must stop and wait. Do not proceed over the railroad tracks until the red lights stop flashing, even if the gate rises. When the crossing devices or a person warns you a train is coming, stop at least 15 feet from the nearest track.
What to do when red light flashes?
Flashing Red: If the traffic signal is flashing red, treat it as a stop sign and come to a complete stop at the intersection. Look carefully in all directions before proceeding. Other directions may have a different type of signal indication.
What do flashing red lights and crossing gates indicate?
You are required to stop at all railroad crossings when there is a signal of an approaching train. These signals include flashing red lights, a lowered crossing gate, a flagger signaling, or a train's audible signal of warning.
When a driver is stopped by an active railroad crossing with red flashing lights and cross arms he or she should?
Flashing red lights at a railroad crossing mean STOP! A full stop is always required. Make sure that there is no train traveling on the tracks and proceed.
What does a flashing red light mean on the road?
stop signFLASHING RED TRAFFIC LIGHT: A flashing red traffic. signal means exactly the same as a stop sign, STOP! After stopping, proceed when safe and observe the. right-of-way rules.
What does at a level crossing two red lights flashing alternately mean?
temporarily prohibit the passing of vehiclesA flashing red light, or two alternately flashing red lights, temporarily prohibit the passing of vehicles before a level crossing, an entrance to a moving bridge or a pontoon ferry, in the vicinity of an exit of fire extinction vehicles or due to the approach of an aircraft at a low altitude.
Which three things should you do if you break down on a level crossing the lights have not yet begun to flash?
Incidents and breakdowns.
- Get everyone out of the vehicle and clear of the crossing immediately.
- Use a railway telephone if available to tell the signal operator. Follow the instructions you are given.
- Move the vehicle clear of the crossing if there is time before a train arrives.
What must you do when red lights are flashing at a railway level crossing?
Can you pass on a red flashing light?
Flashing RED traffic light (stop signal) means the same as a stop sign. You must come to a full stop and then you may go when it is safe to do so. Flashing YELLOW arrow means turns are permitted but you must first yield to oncoming traffic and pedestrians, then proceed with caution.
What does red lighting mean in the flash?
The reasons for this coloration is unknown. Red: Red lightning is typically the result of a speedster having a connection to the Negative Speed-Force, which Eobard Thawne created at some point after recreating the Flash's powers. Red lightning is seen in Eobard himself as well as Edward Clariss/Rival.
What are you supposed to do at a railroad crossing in PA?
–Whenever any person driving a vehicle approaches a railroad grade crossing under any of the circumstances stated in this section, the driver of the vehicle shall stop within 50 feet but not less than 15 feet from the nearest rail of the railroad and shall not proceed until it can be done safely.
What does a flashing light at an intersection mean you must?
As a safety measure, the intersection runs a default program. The busier of the two intersection streets gets a yellow flashing light, while the less busy intersection gets a flashing red light. The flashing red light means: Come to a complete stop as if you've stopped at a stop sign and proceed only when clear.
When must drivers stop at an automated railway level crossing with barriers and red flashing lights?
These railway crossings have flashing lights and barriers which automatically come down when a train is approaching. The amber light is similar to an amber traffic light – you should stop safely when the amber light shows. When flashing red lights show, you must stop safely. You must never try and drive through.
What does a flashing red light at an intersection mean quizlet?
Flashing Red – A flashing red traffic signal light means "STOP." After stopping, you may proceed when it is safe. Observe the right-of-way rules.
Where are flashing red light signals?
Explanation: These signals are found at level crossings, swing or lifting bridges, some airfields and emergency access sites. The flashing red lights mean stop whether or not the way seems to be clear.
What should your response to a flashing red light be the same as?
FLASHING RED—A flashing red signal light means exactly the same as a stop sign: STOP! After stopping, proceed when safe and observe the right-of-way rules. RED ARROW—A red arrow means STOP until the green signal or green arrow appears.