On a train, the wheels are mounted into “bogies” consisting of two axles (with two wheels on each axle). This is basically a small chassis. There is typically “primary” suspension between the axles and the bogey. The train carriage body then sits on top of those bogies (one bogey at each end).
What is the front of train called?
The engine, or locomotive, powers the train by pulling the cars from the front.
What does a train consist of?
Trains are typically defined as one or more locomotives coupled together, with or without cars.
What is a chassis rail?
The chassis rails are made of high tensile pressed steel channels. In a ladder type of chassis, the chassis rails carry all the main components of the vehicle, such as the engine, gearbox, front and rear axle suspensions. Also adding to the burden of the chassis are components such as fuel tanks and air tanks.
What is the front of a train called where the driver sits?
The cab, crew compartment or driver's compartment of a locomotive, or a self-propelled rail vehicle, is the part housing the train driver, fireman or secondman (if any), and the controls necessary for the locomotive or self-propelled rail vehicle's operation.
What is the frame of a train called?
What is the back of a train called?
A caboose is a train car that is usually at the end. If you are pulling up the rear, you could call yourself the caboose. The engine is the first car on a freight train, and the last car is usually the caboose. Besides being last, the other feature of a caboose is its use by the crew.
What is the drive of a train called?
A train driver, engine driver, engineman or locomotive driver, commonly known as an engineer or railroad engineer in the United States and Canada, and also as a locomotive handler, locomotive engineer, locomotive operator, train operator, or motorman, is a person who operates a train, railcar, or other rail transport …
What are the things at the end of train tracks called?
A buffer stop, bumper, bumping post, bumper block or stopblock (US), is a device to prevent railway vehicles from going past the end of a physical section of track.
What is the function of bogie frame?
Bogie frame monomotorA large single motor is mounted on the bogie frame, occupying part of the body space. Drive to the axles is via gear trains. This couples the axles together for traction purposes. It gives a low yaw inertia to the bogie.
What is a frame rail?
In the case of a separate chassis, the frame is made up of structural elements called the rails or beams. These are ordinarily made of steel channel sections, made by folding, rolling, or pressing steel plate.
What is a chassis vs frame?
It encompasses the entire undercarriage of the vehicle. The frame, however, specifically refers to the structural framework or skeleton of the vehicle, providing the main support and strength. Basically, the chassis is a broader descriptive term that includes the frame as one of its essential components.