Never drive straight across speed bumps or railroad tracks. Cross slowly at a 45 degree angle. Maintain steering control by keeping contact with the ground at all times. If an area is cluttered, walk the route first to spot problems.
What is the correct way to cross railroad in the forklift?
Avoid sharp turns; you could tip the forklift over. Cross railroad tracks on a diagonal to prevent damage to wheels and to keep the load from slipping. Don't allow unauthorized drivers on a forklift, and don't let the forklift be used for horseplay.
When traveling with a load the mast should tilted back?
Tilting the mast back reduces the load distance and makes the load safer to carry. Figure 7. Tilting the mast forward increases the load distance and makes the load less stable.
Should railroad tracks be crossed straight on?
Why are rails not straight?
If the road is driven in a straight line type, many areas may not be on the running line, and the pressure from the passengers is naturally unresolved. The curved line can play an important role in relieving passenger pressure by high-speed train.
What is the correct amount of tilt to be applied when carrying a load?
Tilt loads backwards. Travel with forks as low as possible from the floor and tilted back (usually within 10-15 cm (4 to 6 inches) above the floor). Match speed to, load, presence of pedestrians, obstructions, and driving and workplace conditions, including slippery surfaces.
Where must the load be positioned when traveling on an incline?
point up the inclineWhen traveling with a load, the load should point up the incline, regardless of direction of travel. Going up the incline: Drive forward.